Concrete saw blades and diamond drills: key technology tools for energy and infrastructure projects in the Middle East

—— To provide efficient, accurate and sustainable cutting solutions for complex projects 

Core needs and challenges of the Middle East market

The Middle East, as the core area of global oil and gas resources, is accelerating the development of ultra-deep oil and gas fields, expanding cross-border pipeline networks, and constructing LNG storage facilities.  According to data from the International Energy Agency (IEA), investment in oil and gas projects in the Middle East exceeded $32 billion in 2024, with scenarios such as hard rock drilling, high-strength concrete cutting, and complex geological crossings placing stringent demands on tool performance:

•  Hard rock drilling efficiency: the drilling depth of shale gas fields in Saudi Arabia is generally more than 4,5km, and the wear rate of traditional drill bits is up to 60%;

•  Concrete cutting accuracy: The UAE storage tank project needs to complete the precise opening of a 1.2 m thick prestressed concrete wall, and the error should be controlled within ±2mm;

•  Construction safety and environmental protection: Qatar expansion project requires dust emission less than 5mg/m³, noise less than 85dB.

Concrete saw blades: the "silent breaker" of Middle East infrastructure projects

1. Construction of oil and gas storage and transportation facilities

• Concrete cutting of LNG storage tanks: Diamond welding saw blades (diameter 800-1200mm) are used, combined with high-pressure water cooling system, to achieve a daily cutting capacity of 120 m in the Oman port tank group project, which is 40% more efficient than traditional disc saws and 24% less dust concentration;

•  Pipe through concrete obstacle: In the refinery renovation, φ650mm diamond saw blade completed the rapid cutting of 3.6 m thick reinforced concrete foundation, the vibration amplitude was only 0.5mm, avoiding the disturbance to the surrounding sensitive equipment.

2.  Data support and technical advantages

•  Customized service: for the UAE quartz sand concrete (quartz content>30%), multi-layer brazed diamond particle saw blade is provided, which improves wear resistance by 35%.

Three, diamond drill bit: the "ultimate solution" for deep well and hard rock drilling

Performance verification and innovative technology

•  Laboratory data: According to the test by the technical center, the wear rate of our drill bit in rock layer with single axis compressive strength of 260MPa is only 0.03mm/h;

Why do you choose our solution?

1. Cost optimization scheme: Through drilling ratio energy (SE) analysis, reduce the tonnage tool cost by 27% for Oman customers;

Five, customer success cases

800MM Saw blades set an industry benchmark of 9,800 square meters of cutting per month in Dubai foundation engineering

Let every meter of drilling and cutting become a solid guarantee for your project profit!